Коронавирус COVID–19:Информация для клиентов касательно коронавируса COVID-19
Our Product Finder tool allows you to find the perfect product for your requirements.
Коронавирус COVID–19:Информация для клиентов касательно коронавируса COVID-19
45° Union, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory
•允许将导管或腺体连接到设备
• Suitable for rigid or flexible conduit
• Integral coupling eliminates the need to rotate the conduit
•通用/工业版可用
• Equipment interface ‘O’ ring seal available
•-60˚C至200˚C
• Globally marked, IECEx, ATEX & cCSAus
Note:
Male-to-Male or Female-to-Female thread option available.
Available with an equipment interface ‘O’ ring seal. For such options please add the suffix letter “R” after the type number in the ordering reference above, e.g. 784RDM2M2.
If 2 separate enclosures are required to be connected together please contact CMP Products.
BS 6121:Part 1:1989, IEC 62444, EN 62444 | |
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only | |
cml 18atex1329u | |
II 2 GD Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da IP6X IM2 Ex d I Mb / Ex e I Mb |
|
EN 60079-0,1,7,31 | |
Iecex CML 18.0186U. | |
Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da IP6X, Ex d I Mb, Ex e I Mb | |
IEC 60079-0,1,7,31 | |
1055233 | |
课上我, Div 1 & 2, Groups A,B,C,D ; Enclosure type 4X : Class I, Zone 1, AEx de II ; Ex de II | |
C22.2 No.0,0.5,30,94, CAN/CSA E60079-0,1,7, CAN/CSA E61241-1, UL Std 50, 1203, UL 60079-0,1,7 | |
TC RU C-GB.ГБ05.B00138 | |
TÜV 12.1334U | |
IP66 when fitted with a CMP ‘O’ ring or Entry Thread Seal | |
Brass (standard), Electroless Nickel Plated Brass, Aluminium, Stainless Steel |
**参考Maintaining a Sealfor further information on Ingress Protection Ratings
METRIC | NPT | METRIC/NPT | |||||||||||
Ordering 参考 (Brass, Metric) |
Male Forward 线 Size A |
Minimum 线 长度“e” |
Female Rear 线Size B |
Ordering 参考 (Brass, NPT) |
Male Forward NPT Thread Size A (in) |
Minimum NPT Thread 长度“e” (in) |
Female Rear 线Size B (in) |
毛孔 Diameter C |
Max Protrusion Length D |
Max 过剩 Length F |
在 公寓 Hex G |
在 Corners Ø G |
Installation 扭矩 (Nm) |
784DM2M2 | M20 X 1.5 | 0.059 | M20 X 1.5 | 784DT1T1 | 1/2 | 0.79 | 1/2 | 0.056 | 0.239 | 0.220 | 0.181 | 0.199 | 0.028 |
784DM3M3 | M25 X 1.5 | 0.059 | M25 X 1.5 | 784DT2T2 | 3/4 | 0.80 | 3/4 | 0.079 | 0.259 | 0.241 | 0.197 | 0.217 | 0.039 |
784DM4M4 | M32 X 1.5 | 0.059 | M32 X 1.5 | 784DT3T3 | 1 | 0.98 | 1 | 0.104 | 0.273 | 0.274 | 0.236 | 0.260 | 0.059 |
784DM5M5 | M40 x 1.5 | 0.059 | M40 x 1.5 | 784DT4T4 | 1-1 / 4“ | 1.01 | 1-1 / 4“ | 0.128 | 0.295 | 0.301 | 0.256 | 0.281 | 0.098 |
784DM6M6 | M50 x 1.5 | 0.059 | M50 x 1.5 | 784DT5T5 | 1-1 / 2“ | 1.03 | 1-1 / 2“ | 0.169 | 0.368 | 0.346 | 0.295 | 0.325 | 0.118 |
784DM7M7 | M63 X 1.5 | 0.059 | M63 X 1.5 | 784DT6T6 | 2 | 1.06 | 2 | 0.209 | 0.404 | 0.405 | 0.355 | 0.391 | 0.177 |
Dimensions are displayed in inches unless otherwise stated |
METRIC | NPT | METRIC/NPT | |||||||||||
Ordering 参考 (Brass, Metric) |
Male Forward 线 Size A |
Minimum 线 长度“e” |
Female Rear 线Size B |
Ordering 参考 (Brass, NPT) |
Male Forward NPT Thread Size A (in) |
Minimum NPT Thread 长度“e” (in) |
Female Rear 线Size B (in) |
毛孔 Diameter C |
Max Protrusion Length D |
Max 过剩 Length F |
在 公寓 Hex G |
在 Corners Ø G |
Installation 扭矩 (Nm) |
784DM2M2 | M20 X 1.5 | 15.0 | M20 X 1.5 | 784DT1T1 | 1/2 | 0.79 | 1/2 | 14.3 | 60.6 | 55.8 | 46.0 | 50.6 | 7.0 |
784DM3M3 | M25 X 1.5 | 15.0 | M25 X 1.5 | 784DT2T2 | 3/4 | 0.80 | 3/4 | 20.1 | 65.9 | 61.2 | 50.0 | 55.0 | 10.0 |
784DM4M4 | M32 X 1.5 | 15.0 | M32 X 1.5 | 784DT3T3 | 1 | 0.98 | 1 | 26.4 | 69.3. | 69.7 | 60.0 | 66.0 | 15.0 |
784DM5M5 | M40 x 1.5 | 15.0 | M40 x 1.5 | 784DT4T4 | 1-1 / 4“ | 1.01 | 1-1 / 4“ | 32.6 | 74.9 | 76.4 | 65.0 | 71.5 | 25.0 |
784DM6M6 | M50 x 1.5 | 15.0 | M50 x 1.5 | 784DT5T5 | 1-1 / 2“ | 1.03 | 1-1 / 2“ | 43.0 | 93.5 | 87.9 | 75.0 | 82.5 | 30.0 |
784DM7M7 | M63 X 1.5 | 15.0 | M63 X 1.5 | 784DT6T6 | 2 | 1.06 | 2 | 53.0 | 102.7 | 102.8 | 90.2 | 99.2 | 45.0 |
Dimensions are displayed in millimetres unless otherwise stated |