EN CN

Product Finder

我们的产品搜索工具允许您为您的要求找到完美的产品。

767 | Dome Stopper PlugAvailable brass, nickel plated brass, aluminium, stainless steel & nylon

Dome Head Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory

• Provides means of blanking unused cable entries
• Temporary or permanent
• General purpose / industrial version available
•设备接口'O'环密封可用
• Nylon Ex e only version available (-20˚C to +60˚C)
•-60˚C至200˚C(金属版本)
• Globally marked, IECEx, ATEX, cCSAus & UL

描述 艾伦钥匙休息 金属 非金属
Ex d Ex e Industrial Ex e Industrial
747 Recessed Non-Tamper Proof Type 'A'
747 Recessed Tamper Proof Type 'B'
757个六角形头
757六角头C / W'O'环封
767圆顶头
767圆顶头c/w 'O' ring seal
BS 6121:第1部分:1989,IEC 62444,EN 62444
IK10到IEC 62262(20焦耳)黄铜和不锈钢
CML 18ATEX1320X
II 2G EX D IIC GB,EX E IIC GB,II 1D EX TA IIIC DA
IM2 Ex d I Mb, Ex e I Mb
(II 2G Ex e IIC Gb, II 1D Ex ta IIIC Da only on Nylon version)
EN 60079-0,1,7, 31
Iecex CML 18.0177x.,IECEx SIM 15.0002X
前我mb, Ex e I Mb; Ex d IIC Gb,Ex e IIC Gb, Ex ta IIIC Da
IEC 60079-0,1,7,31
1055233
I类,A组,B,C和D;IP66,67,68;外壳4x;II类组E,F和G;III类
ex de II,I类,1区,AEX DE II;
C22.2 No. 0, 0.5, 30,94,CAN/CSA E60079-0, 1, 7, UL50 Edition 11, UL1203 Edition 4,
UL.60079-0, 1, 7
E214221.
Class I, Groups A,B,C,D; Class II Groups E,F,G; Class III
UL.1203
TC RU C-GB.ГБ05.B00138
14-GA4BO-0248X
P444949
GYJ13.1143X
TÜV 12.1333X
03866.
LRS: 01/00173 (E1),DNV: E-13848,ABS: 01-LD234401C/2-PDA
-60°C至+ 200°C(金属),-20°C至+ 60°C(尼龙)
IP66或IP68配有“O”戒指
Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel, Nylon

** Refer to保持封印有关入口保护评级的更多信息

产品选择表

点击这里查看技术插图

Technical Illustration

点击这里查看如何秩序

订购参考 线程尺寸 Minimum Thread Length Head Diameter "A" Protrusion Length "B" Allen Key Size A/F
767DM1 M16 X 1.5 0.591 0.866 0.217 M8
767DM2 M20 x 1.5 0.591 1.063 0.217 M10
767DM3 M25 X 1.5 0.591 1.181 0.217 M10
767DM4 M32 x 1.5 0.591 1.417 0.217 M10
767DM5 M40 X 1.5 0.591 1.811 0.217 M10
767DM6 M50 X 1.5 0.591 2.165 0.217 M10
767DM7 M63 X 1.5 0.591 2.677 0.217 M10
767DM8 M75 X 1.5 0.591 3.150 0.217 M14
767DM9 M90 x 2.0 0.945 3.740 0.217 M14
767DM10 M100 x 2.0 0.945 4.252 0.217 M14
Dimensions are displayed in inches unless otherwise stated
订购参考 线程尺寸 Minimum Thread Length Head Diameter "A" Protrusion Length "B" Allen Key Size A/F
767DM1 M16 X 1.5 15.0 22.0 5.5 M8
767DM2 M20 x 1.5 15.0 27.0 5.5 M10
767DM3 M25 X 1.5 15.0 30.0 5.5 M10
767DM4 M32 x 1.5 15.0 36.0 5.5 M10
767DM5 M40 X 1.5 15.0 46.0 5.5 M10
767DM6 M50 X 1.5 15.0 55.0 5.5 M10
767DM7 M63 X 1.5 15.0 68.0 5.5 M10
767DM8 M75 X 1.5 15.0 80.0. 5.5 M14
767DM9 M90 x 2.0 24.0 95.0 5.5 M14
767DM10 M100 x 2.0 24.0 108.0 5.5 M14
Dimensions are displayed in millimetres unless otherwise stated